| Forum Home > Main Forum area. > New key machines - new challenge ! | ||
|---|---|---|
|
Member Posts: 86 |
Well - slowly getting myself sorted out - got my key cutting machines installed at the weekend into the back of the van, Jakey Mk2 mortice and Delta semi auto cylinder. Power either by mains from customer ( caravan hookup type socket going to switches in the van ) or from a 3000 watt generator - also installed into the van.
Went round to the neighbours today for their first use and try and figure out how they work !
No cylinder keys to cut but did use up my entire beginners supply of safe keys doing duplicates for gun cabinets ! - I think these may be a 'big' thing in this area. And they all worked ok after some fettling (great word that) on a couple of them that had side wards which needed cutting into them.
On leaving he asked me about Banham keys - he wants me to see if I can cut one for him for a spare key for his mother.
Banhams website is not a lot of help - they just want you to send them the key and a lot of doc's proving ownership, and I have as yet had no luck deciphering the SKS key catalogue looking for the correct blank !
It is not a dimple key, has the Banhams registration number on it and I was wondering if anyone knows of a supplier of Banham key blanks ?
Is there a usual rate for key cutting ? I reckoned on about £3 a key, but he said last time (TImpsons) for a mortice key it cost him £7+ per key.
| |
|
-- "Put your trust in God my boys - and keep your powder dry" - Oliver Cromwell
| ||
|
Moderator Posts: 232 |
I charge £3 for a cylinder and £4.50 for a mortice. | |
| ||
|
Member Posts: 34 |
Hi Gerry I am sure the following company may be able to help you, I hope. attached is the link :-
| |
| ||
|
Moderator Posts: 232 |
https://skskeys.co.uk/products/high-security/ban-3d-key-blank/
Is it this one?
or these?
https://skskeys.co.uk/key-listings/high-security/b/
| |
| ||
|
Member Posts: 10 |
Hi Dean, with interest how much did it cost for the machine and the install. Good luck for the future. "Build it and they will come"
| |
| ||
|
Member Posts: 10 |
Sorry should have been addressed to Jerry@Dorset APOLOGIES all electioned out.:) | |
| ||
|
Member Posts: 86 |
Martin -
The key machines were £2068 inc vat, this included 4 key boards (1 x Mortice and 3 x Cylinder) plus key catalogues etc
I got a caravan mains hookup kit from a local caravan dealers for £65 which was 1 x blue socket to mount inside the van connected to 1 x rcd consumer unit to give 2 supplies connected to 2 x single normal household type sockets - which the machines plug into - or battery charger - lights whatever.
I can use a caravan hookup cable to take power from the generator into the caravan socket and onto the normal sockets.
Dean - cant get those links to open, but will head over to SKS website and work it out from there.
Gerry | |
|
-- "Put your trust in God my boys - and keep your powder dry" - Oliver Cromwell
| ||